-
Product Catalog
Clamps
DIN Fasteners
Hardware - Access
Inserts
Installation Tooling
Machined Fasteners
-
No subcategories
Mil-SPEC
Plastic Fasteners
Rivets
Rubber Products
Screws
Spring Steel Fasteners
Washers
- Flat Washers, Shims
- D Shaped Washers
- Key Washers
- Retention Washers
- Centering Washers
- D Shaped Hole Washer
- Lock Washers
- Shoulder Washers
- Square Hole Washers
- Clipped Washers
- Finishing Washers
- Notch Washers
- Split Washers
- Tab Washers
- Rectangular Washers
- Spring Washers
- Terminal Cup Washers
- C Shaped Washers
- Hexagonal Hole Washers
- Retaining Washers
- Square Washers
National Engineered Fasteners is a distributor of standard & custom electronic components including military specification components for automotive, marine & aerospace industries. Electronic components include insulated feedthroughs, insulated studs, non-insulated studs, circular ground studs, swage mounted studs, insulated terminals, non-insulated terminals, pins, sockets, molded terminal headers, terminal boards, panel hardware, handles, resistor boards, tooling, test jacks, microwave components & self clinching fasteners. Components are available with plating finishes such as silver copper, gold over silver, gold copper, tin lead, tin copper, gold nickel, cadmium, nickel copper, chromate, zinc chromate & zinc. Products included within: captive panel screws in brass, steel or stainless steel in over 30 metallic finishes. Threads range from 2-56 to 3/1=8-16, lengths range from 21/32 to 2 inches and head diameters from 5/16 to ¾ inch; spacers in round or hex profiles, in aluminum, brass, steel, stainless steel, nylon and phenolic, in over 40 metallic finishes, lengths range from 3/32 to 2 inches in diameters from 1/8 to ¾ inches; standoffs in female and male-female styles with round, hex and square profiles in aluminum, brass steel, stainless steel and nylon with over 40 metallic finishes, threads ranging from 0-80 to 5/16-18, in lengths from 3/32 to 10 inches with diameters ranging from 1/8 to 5/8 inch; jack screws are standard design hex jack screws, supplied with washer and nut. They come in Steel and Zinc plate per ASTM-B-633 (yellow chromate) finish. They can be supplied in a 4-40 thread, lengths from 3/16 to ¾ inch. Precision Shoulder Screws come slotted and/or socket heads available. Material include brass, steel, and stainless steel with more than 30 metallic finishes, ranging from 4-40 to 3/8-16 threads. Shoulder lengths from .125 to 1.5 inch, diameters from .1245 to .4995 inch. Head diameters range from ¼ to 5/8 inch. Thumb Screws come in washer face, plain and push tyles, in aluminum, brass, steel or stainless steel with more than 40 metallic finishes. Threads range from 4-40 to ¼-20 with lengths from ½ to 2.5 inches, with diameters ranging from 3/16 to ½ inch. Printed Circuit Board Supports include standoffs, spacers, adhesive base supports, threaded and snap-on, blind hole, flexible hinge, edge/corner and many others. Materials include three different nylons, a flame retardant nylon, polycarbonate, and CPVC. Handle and Handle Ferrules come either round, rectangular, and oval profiles, in either fixed, offset, 2 & 3-position, free fall and infinite position styles. Materials include Aluminum, brass, steel, and stainless steel in more than 40 metallic finishes with internal and external threads in lengths from ¾ to 7 inches. All military electrical hardware is dfar compliant
-
AN3064
AN3064 (REV. 5), AIR FORCE-NAVY AERONAUTICAL STANDARD, BOX CONNECTOR, ELECTRICAL (21 SEP 1956
-
MS18029
COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY
-
MS21314
STRAP, RETAINING, TWO HOLE, FOR PIPE, CONDUCT, AND CABLE CNCL S/S BY NASM21314
-
MS21315
MS21315A (NOTICE 1), MILITARY STANDARD: STRAP, RETAINING, TWO HOLE, FOR TUBING (4 FEB 1999) [S/S BY NASM21315]
-
MS21385
KNOB - TACTILE SERIES, ILLUMINATED AND NON-ILLUMINATED CNCL S/S BY NASM21382
-
MS21387
KNOB - ROUND, ILLUMINATED AND NON-ILLUMINATED, SMALL CNCL S/S BY NASM21387
-
MS21980
FERRULE, OUTER, UNINSULATED, SHIELD TERMINATING, TYPE I TWO PIECE, CLASS I, FOR SHIELDED CABLE
-
MS21981
FERRULE, INNER, UNINSULATED, SHIELD TERMINATING, TYPE I TWO PIECE, CLASS I, FOR SHIELDED CABLE
-
MS24264
MS24264P, DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES F, G AND R (6 FEB 2004)
-
MS24266
CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES F, G, AND R
-
MS24331
SWITCH, SENSITIVE, SEALED CNCL S/S BY MIL-S-8805/40
-
MS24655
SWITCH, TOGGLE, POSITIVE BREAK, MINIATURE TOGGLED SEALD, SINGLE POLE, SOLDER LUG INTEGRATED WIRE TERMINALS, .250 MOUNTING BUSHING
-
MS25041
LIGHT, INDICATOR, PRESS TO TEST, SMALL
-
MS27291
SUPPORT, CABLE, ELECTRICAL, CONNECTOR
-
MS27721
SWITCH, TOGGLE, MINIATURE, DOUBLE POINT, TOGGLE SEAL, LEVER LOCK
-
MS3113
CONNECTORS, RECEPTACLE, ELECTRIC, SERIES 1, SOLDER TYPE, SOLDER MOUNTING, BAYONET COUPLING REMAINS INACTIVE FOR NEW DESIGN NO S/S
-
MS3114
CONNECTORS, RECEPTACLE, ELECTRICAL, SERIES 1, SOLDER TYPE, JAM NUTMOUNTING, BAYONET COUPLING, CLASSES E, F, H, AND P
-
MS3115
MS3115G, DETAIL SPECIFICATION SHEET: CONNECTORS, RECEPTACLE, ELECTRICAL, DUMMY STOWAGE, BAYONET COUPLING, FOR MIL-DTL-26482 CONNECTORS, SERIES 1 AND 2 (29 APR 2009)
-
MS3119
ADAPTER, CONNECTORS, RECEPTACLE, ELECTRICAL, THRU-BULHEAD MOUNTING, FLANGE, BAYONET COUPLINGS, SERIES 1, INACTIVE FOR NEW DESIGN
-
MS3367
STRAP, TIEDOWN, ELECTRICAL, COMPONENTS, ADJUSTABLE, SELF-CLINCHING, PLASTIC, TYPE I, CLASS 1 CNCL REFER TO SAE AS33671
-
MS39087
HANDLE, BOW CNCL S/S BY NASM39087
-
MS91525
MS91525F, MILITARY STANDARD: KNOBS, CONTROL, BAR, METAL AND PLASTIC (14 AUG 1980) [SUPERSEDED BY NASM91525]
-
MS91528
MS91528J, MILITARY STANDARD: KNOBS-CONTROL, PLASTIC (ROUND, CONCENTRIC, POINTER, SPINNER, SPINNER SLIP-CLUTCH, BAR, TACTILE, KNOB LOCK POINTER, SLIP-CLUTCH, AND KNOB LOCKS) (06 FEB 1984) [SUPERSEDED BY NASM91528]
-
NAS1829
POST, ELECTRICAL-MECHANICAL EQUIPTMENT, STUD TYPE
-
NAS1830
POST, ELECTRICAL-MECHANICAL EQUIPTMENT, SWAGE TYPE
-
NAS1831
POST, ELECTRICAL-MECHANICAL EQUIPTMENT
-
NAS574
PIN, REAR MOUNTING - ELETRONIC EQUIPMENT