-
Product Catalog
Clamps
DIN Fasteners
Hardware - Access
Inserts
Installation Tooling
Machined Fasteners
-
No subcategories
Mil-SPEC
Plastic Fasteners
Rivets
Rubber Products
Screws
Spring Steel Fasteners
Washers
- Flat Washers, Shims
- D Shaped Washers
- Key Washers
- Retention Washers
- Centering Washers
- D Shaped Hole Washer
- Lock Washers
- Shoulder Washers
- Square Hole Washers
- Clipped Washers
- Finishing Washers
- Notch Washers
- Split Washers
- Tab Washers
- Rectangular Washers
- Spring Washers
- Terminal Cup Washers
- C Shaped Washers
- Hexagonal Hole Washers
- Retaining Washers
- Square Washers
LARGE SECONDARY HEAD
ABOUT LARGE SECONDARY HEAD RIVET
Rivet Body Material | Head Style | Rivet Diameter | Max. Grip |
Mandrel Mat’l & Design | Special Features |
---|---|---|---|---|---|
A-Aluminum | DS-Dome Head, Large Secondary Head | In 32nds of an inch Example: 4 equals 4/32" or 1/8" body diameter | In 16th of an inch Example: 4 equals 4/16" or 1/4" maximum grip range |
ABS-Aluminum Break Mandrel BS Carbon Steel Break Mandrel |
L-Locking Mandrel |
Body / Mandrel Material |
1/8 |
5/32 |
3/16 | |||
---|---|---|---|---|---|---|
Shear | Tensile | Shear | Tensile | Shear | Tensile | |
Aluminum / Aluminum | 150 | 150 | 290 | 200 | 405* | 290* |
Aluminum/Steel | - | - | - | - | 300 | 325 |
* Values are for locking style. Non-locking style: Shear - 300; Tensile - 325
NOTE: Values are in Ibf and all charts are typical ultimate strength tested in accordance with IFI standards. Stated values are a guide only and may vary depending upon application.
MATERIALS AND FINISHES
Rivet | Rivet Body | Mandrel | ||
---|---|---|---|---|
Code | Material | Finish | Material | Finish |
ADS**ABS | 5000 Series Aluminum | Plain | Aluminum | Plain |
ADS**BS | 5000 Series Aluminum | Plain | Carbon Steel | Plain |
PRODUCT SPECIFICATION
NOM. DIA. | RIVET NO. | GRIP RANGE | L | H | E | Tool Nosepiece |
---|---|---|---|---|---|---|
1/8 | 44 | .126- .250 | .835 ±.015 | .312 ± .015 | .045 ± .004 | PRN414+ PRP32* |
46 | .126-.375 | .960 ±.015 | .312 ± .015 | .045 ± .004 | ||
5/32 | 54 | .126- .250 | .690 ± .020 | .315 ± .015 | .051 ± .004 | PRN514+ PRP33A* |
58 | .197- .472 | .980 ± .020 | .315 ±.015 | .051 ± .004 | ||
3/16 | 64* | .126-.250 | .690 ± .020 | .378 ±.015 | .054 ± .004 | PRN614+ |
66 | .187- .375“ | 1.000 ± .020 | .470 ± .020 | .060 ± .008 | ||
68 | .197-.472 | .925 ± .020 | .378 ±.015 | .054 ± .004 |
*Dimensions are for ADS64ABSL. For ADS64ABS, L is .875 ± .020, H is .470 ± .020, E is .060 ± .008
**ADS66ABS grip range is .080 - .375
+ Power Tool * Hand Tool
BASIC DIMENSIONS
NOM. DIA. | Hole Size | D | F MAX. | N MIN. | W REF. |
---|---|---|---|---|---|
1/8 | .129-.143 | .122-.128 | L Max+ .120 | 1.00 | .076 |
5/32 | .165-.169 | .157-.162 | L Max + .140 | 1.06 | .090 |
3/16 | .197-.201* | .185-.195 | L Max+ .160 | 1.06 | .114 |